Are you looking to renew your Hey Abby grow kit by swapping out some parts?
Our expert team has created a series of tutorials, in which we'll walk you through the process of replacing various parts of your growing system, including:
water pump
Let's get started and learn how to replace the water pump in this tutorial.
Water Pump Replacement Instruction
1. Remove the rear vent panel of the box- it is held on by 8 screws；
2. Locate the silver pump；
3. Unplug both hoses from the left side of the pump. You may want to mark the hoses so you remember which hose goes into each port;
4. Unplug the terminal connector- there is a tab that needs to be pinched before pulling it out of the connector;
5. Slide the pump to left, removing it from the silicone strap holding it in place;
6. You can now insert the new pump in place of the old one;
7. Connect the hoses to the new pump, and and plug the terminal connection in.
We hope this step-by-step guide has been helpful and easy to follow. Browse previous articles in Hey abby's Help Center if you want to learn more about the water pump, such as how to solve its malfunctioning.
*Disclaimer: These part replacement instructions pertain exclusively to original Hey abby parts that we've directly sent to you under the Hey abby warranty. Our warranty program does not cover any unauthorized third-party components.