Looking to replace certain parts of your Hey abby grow kits for an exciting renovation?

Hey abby's expert team has released a series of tutorials to guide you through the step-by-step process of replacing several parts of your grow boxes, including:

Let's get started and learn how to replace the smart dial in this article.

1. Turn the power off, and open the front door of the grow box;

2. Remove the 6 screws holding the top panel on;

3. Remove the top panel, from the back of the box- lift upward;

4. Locate the terminal connector where the dial plugs into the board;

5. Carefully flip open the black hinge style cover, that hold the wire in the connector;

6. Remove the wire from the connector, pull outward;

7. Follow the black wire to where it meets the dial. You will see the dial is connected to the box with 3 screws. Remove these screws and pull the old dial off;

8. You can now connect and replace the old dial with the new one. Once you have the wire connected, make sure to close the hinge cover to secure the wire.

We hope this step-by-step guide has been helpful and easy to follow. Browse previous articles in Hey abby's Help Center if you want to learn everything about the smart dial, such as its functions and quick fixes to the possible issues.