How to Replace the Door Lock

Learn how to replace the air pump of Hey abby grow box step by step.

Updated over a week ago

Ready to renew your Hey Abby grow box by changing a few parts?

Our expert team has designed a series of tutorials that will walk you through the process of replacing different parts of your grow cabinet, including:

Let's get started and learn how to replace the door lock in this article.

Door Lock Replacement Instruction

1. Locate the locking mechanism: located inside the box, on the left hand side (where the door opens);

how to replace the door lock of hey abby grow box_step 1

2. Remove the 3 screws holding the locking mechanism in place;

how to replace the door lock of hey abby grow box_step 2

3. Using your screwdriver, insert it into the open mouth of the locking mechanism, and push it inward- towards the back wall of the box. The locking mechanism will slide out;

how to replace the door lock of hey abby grow box_step 3

4. You'll need to gently but firmly pull the locking mechanism out, so that the wires and terminal connectors are exposed. Pinch and unplug the terminal connections;

If the wires are stuck, a helpful tip is to wiggle the two wires inside the lock back and forth. This movement can help loosen them and make it easier to pull them out smoothly.

how to replace the door lock of hey abby grow box_step 4
Hey abby changing door lock


5. You can now plug in the new lock’s terminal connectors, put it in place, and secure it with the 3 screws!

We hope this step-by-step guide has been helpful and easy to follow. Browse previous articles in Hey abby's Help Center if you want to learn more about the door lock, such as how to unlock the grow box through voice control.

*Disclaimer: These part replacement instructions pertain exclusively to original Hey abby parts that we've directly sent to you under the Hey abby warranty. Our warranty program does not cover any unauthorized third-party components.

Did this answer your question?