If you’re looking to upgrade the grow light in your grow box, this guide will walk you through the simple steps to replace it.
Remove the Old Grow Light
Power off the grow box;
Unscrew the 6 fixing screws at the bottom of the grow light using a screwdriver;
Remove the top cover of the grow box;
Disconnect the 3 communication interfaces from the top control module;
Release the locking clasp and unplug the grow light’s power connector;
Unscrew the 4 corner screws securing the light frame;
Carefully remove the old grow light module.
Install the New Grow Light
Position the new grow light module at the top of the grow box and secure it by tightening the 4 corner screws.
Reconnect the grow light’s power connector to the port.
Reconnect the 3 communication cables to the top control module securely.
Align the top cover with the grow box and fasten it in place using the 6 original screws.
Power on the device.