Unlock the full potential of your grow closet with the Hey abby R300 smart power strip. With 4 outlets and 4 USB ports, it allows you to control various grow box & tent accessories simultaneously, through your phone using the hey abby APP(Android/IOS).
Each port and outlet comes equipped with an LED indicator, providing a quick status check. Follow this easy guide to connect your smart power strip with your hey abby app.
Before Pairing
To use the power strip, start by plugging it into a wall socket in your home.
We suggest placing your power strip outside the Hey abby device, as shown in the image below, with the cables of your accessories neatly routed through the door crack.
How to Pair R300 Smart Power Strip
Ensure your WiFi is turned on. Open the hey abby APP and navigate to the "Pair the Power Strip" interface [Device Manager > Add Accessory > (Smart Outlets) Add];
Enter the WiFi password;
Unplug the power strip to power off first for 10 seconds, and then plug it in again to power on;
Press the reset button for 5 seconds to reset the device;
Verify that the indicator light is flashing slowly (refer to the video below)
*Tips: If the blue light is flashing more rapidly than shown in the videos, press the 'RESET' button for an additional 5 seconds to start the internet connection mode (blue light flashing slowly).
Click 'Go to connect' - you'll be directed to the hey abby Settings page as shown below. Then, click "Settings" to access your phone's WiFi list.
Select and connect to the Smart Life (SL) WiFi, then go back to the app;
Add the device.
Troubleshooting Tip
Q: What to do if we can not find SmartLife WiFi?
A: Press the reset button for 5 seconds and ensure the light is flashing slowly.