Hey abby's smart indoor humidity temperature monitor is designed to monitor both the temperature and humidity at any level inside and outside your grow box or tent. It allows you to monitor the environment effortlessly with the built-in LCD display—no need to open the app.
Pair your humidity temperature monitor with your smartphone by following this simple guide.
How to Pair R200 Smart Monitor
Install three AAA LR03 1.5v batteries;
Ensure your WiFi and bluetooth are turned on. Open the hey abby APP (Android/IOS) and navigate to the "Pair the Smart Monitor" interface [Device Manager > Add an Accessory > (Smart Monitor) Add];
Press the on/off button 3-5 seconds until the bluetooth icon appears;
Add the device;
Enter the WiFi password;
Adjust the back bracket and place the humidity temperature monitor on the desired horizontal surface for accurate monitoring.
Q: What if the device isn't displayed on the "Pair the Smart Monitor" interface?
A: Reset the monitor using the on/off button at the top, and refresh to search for the device.
FAQs about Using R200
1. How to Connect to WiFi?
Turn on the Bluetooth and location functions on your phone. Keep the router turned on and connect to the 2.4G WIFI. Open the APP, and click to add a new device.
2. My Screen is Showing This. What Should I Do?
If you're experiencing display errors like the one shown in the image, try removing the batteries and inserting fresh ones. If the issue persists, feel free to reach out to us for a replacement device.
3. How to Adjust the Time Setting?
Manual network time adjustment:
Press the <+> and <-> keys at the same time, and when you hear the buzzer beep, the device will obtain the date and time from the network.
Network automatic time adjustment:
When the device is connected to WiFi, the device will automatically obtain the local date and time from the network.
Manually set the time:
In the absence of a network connection, to manually set the time, hold down the <Function> key. This action will take you to the date and time settings, causing the numbers to flash. To increase the numbers, use the <+> key, and to decrease them, use the <-> key. Press the <Function> key to switch to the next number for reduction. Once all settings are done, long-press the <Function> key to save the date and time settings and exit the setting mode. If no button is pressed for more than 30 seconds, the date and time settings will automatically exit without saving the changes.
The key marked by a red cycle is the <function> key
4. How to Switch Between Celsius and Fahrenheit?
Press the <Function> key once to switch between Celsius and Fahrenheit.
5. How to Switch Between 24-Hour and 12-Hour Display?
Press the <-> key to switch between 24-hour and 12-hour display.