Skip to main content
All CollectionsUser's ManualProducts
User Manual | Hey abby Smart Humidifier Gen2
User Manual | Hey abby Smart Humidifier Gen2

Learn how to use your Smart Humidifier Gen2 effectively and safely to create the ideal humidity level for your plants.

Updated over 4 months ago

The Hey abby smart humidifier Gen2 is designed to deliver the moisture your plants need for optimal growth. Its sleek, white, and compact design seamlessly fits within your grow box without interfering with your plants' light exposure.

The Smart Humidifier Gen2 features a generous 360ml tank, providing continuous humidification for 6 to 12 hours on a single refill. This guarantees stable moisture levels, which are crucial for your plants' well-being. For added safety, the humidifier features an anti-dry burning control function that automatically shuts off the device when water levels are low.

Components & Functionalities

Hey abby smart humidifier Gen2 components
  • Mode Switching: Press the power button to toggle between 2 modes: Continuous Humidification and Intermittent Humidification.

  • Mist Outlet: Releases a fine mist to humidify the air.

  • Water Shortage Indicator: A red light will flash rapidly three times when the water level in the tank drops below the safety line, alerting you to refill the tank.

  • Power Indicator: A steady red light indicates that the device is successfully connected to a power source and is powered on.

  • Power Port: It uses a Type-C port for power connection. Just plug in to turn on the device.

How to Use Hey abby Smart Humidifier Gen2?

1. Steps of Installation

how to install the Hey abby Smart Humidifier Gen2

  • Step 1: Rotate the upper cover counterclockwise to open it.

  • Step 2: Pour water into the tank, ensuring the water level meets the device’s indicated markings.

  • Step 3: Rotate the upper cover clockwise to securely fasten it back in place, ensuring a proper seal and safe operation.

Preparation Before Use

  1. Soaking the Cotton Strip: Immerse the provided cotton strip in clean water for about 2 minutes to allow it to fully absorb moisture, ensuring optimal performance. (**Tip**: It's best to use clean tap water for soaking.)

  2. Choosing the Right Water: Use mineral water for the best results. Avoid distilled, purified, or filtered water from your home.

Testing and Troubleshooting

If your humidifier stops working during use, try these simple troubleshooting steps:

  • Testing Method: Gently pinch the probe section of the humidifier with your fingers for a few seconds. If it starts working again, the issue could be related to the water quality. Replace the water immediately with the recommended mineral water.

  • Follow-up Action: After changing the water, check if the humidifier is operating normally. If the problem continues, please contact our support team (email: [email protected]) for further assistance.

2. Powering On/Off

  • Power On: Connect the humidifier to a power source and the grow box; it will automatically start working.

  • Power Off: Disconnect the cable from the grow box to stop the humidifier.

3. Switching Spray Modes

Press the power button to switch between continuous and intermittent humidification modes.

Specs

Operating Voltage

DC5V

Power Consumption

1.0-2.3W

Spray Volume

30mL/H-50mL/H

Operating Current

200-450mA

Water Tank Capacity

12.7 fl.oz (360 mL)

Dimensions

3.4*3.4*5.7 inches (78*78*145 mm)

Weight

6.9 oz (175 g)

Precautions

Please use your humidifier with the following precautions.

  1. Water Type: Do not use distilled water in this humidifier. Distilled water lacks essential minerals that can lead to mineral deposits inside the device over time, potentially affecting its performance and lifespan. Instead, use tap or purified water that has not been distilled.

  2. Water Level: Always ensure the water tank is filled to the recommended level.

  3. Cleaning: Clean the humidifier regularly according to the instructions provided, including the water tank, base, and mist outlet, to prevent the build-up of bacteria, mold, or minerals.

  4. Power Supply: Use only the provided power adapter or one that matches the specified voltage and current requirements. Do not attempt to modify or repair the power cord.

  5. Free from Obstructions: Keep the mist outlet free from obstructions to ensure even distribution of mist.

  6. Not Working Properly: If the humidifier begins to emit an unusual odor, ceases functioning, or leaks water, immediately unplug it and discontinue use until a qualified technician has examined it.

  7. Safe Use: Do not immerse the humidifier or any of its parts in water. Avoid using the humidifier during electrical storms or if there is water on the floor near its power outlet.

  8. Storage: When not in use, empty the water tank, dry the humidifier thoroughly, and store it in a cool, dry place.

Did this answer your question?