Hey abby's Bluetooth Portable PH Meter is your go-to tool for accurate pH, TDS/EC, and water temperature measurements. Plus, it syncs seamlessly with the hey abby APP (Android/IOS), saving you the trouble of jotting down data manually.
Let's dive into this guide and get you set up to pair your Bluetooth pH meter with your smartphone, and keep grow journals in the APP in a snap!
Bluetooth Pairing Guide
Ensure your phone's bluetooth is turned on. Open the hey abby APP and navigate to the "Pair the PH Meter" interface [Device Manager > Add Accessory > (PH Meter) Add];
Activate your ph meter by pressing its power button;
If the Bluetooth icon isn't visible on the meter, press and hold the device's power button for 3-5 seconds until the icon appears.
Wait until the name of your ph meter appears. Click "Add" to successfully pair (ensure the meter remains on during the pairing process).
Q: What if there's Bluetooth icon in the PH meter, but the device isn't displayed on the "Pair the PH Meter" interface?
A: Click the "Refresh" button in the upper right corner.
*If the above method doesn't work, you could try the following steps:
Hold the power button of your Bluetooth PH meter for 3-5 seconds until the Bluetooth icon disappears;
Press and hold the power button for 3-5 seconds again until the Bluetooth icon reappears;
Click the "Refresh" button in the upper right corner.
How to Sync PH Meter's Data with App Settings?
When the Sync Data button is active (in green), clicking this button will automatically retrieve data from your Bluetooth PH Meter.
If the Sync Data button is inactive (grayed-out), clicking this button will prompt a message.
When the conditions mentioned in the prompt box are met (1. Paired; 2. Device is on), clicking OK will automatically reconnect the Bluetooth PH meter.
Q: What if I cannot reconnect the Bluetooth PH meter after clicking OK?
A: Try repeating the process by clicking the Sync Data and OK button again.
*If the above method doesn't work, follow these steps:
Click "Delete PH Meter" in the lower left corner to remove this device;
Re-add the Bluetooth PH meter.
How to Sync PH Meter's Data with Grow Log?
When the sync button is activate (in green), clicking this button will automatically retrieve data from your Bluetooth PH meter.
If the sync button is inactive (grayed-out), clicking this button will prompt a message.
When the conditions mentioned in the prompt box are met (1. Paired; 2. Device is on), clicking OK will automatically reconnect the Bluetooth PH meter.
Q: What if I cannot reconnect the Bluetooth PH Meter after clicking OK?
A: Click the sync button and OK button again.
*If the above method doesn't work, try the following steps:
Click "Delete PH Meter" in the lower left corner to remove this device;
Re-add the Bluetooth PH meter.
Additional Tips
The Bluetooth PH Meter will automatically power off after a period of non-use.
When the meter is turned off, the APP will display it as disconnected.
When the meter is too far from your phone, the APP will display it as disconnected.
When the meter is immersed in the water for testing, please ensure that the water level doesn't exceed the brown plastic ring and that the head detector is fully submerged.